Telefonunuzun IMEI numarasini görmek için * # 0 6 # tuşlayın.
Yazilim versiyonunu görüntülemek için * * * tuşlayın.
Son çevirdiğiniz numarayi tekrar aramak için 0 # tuşlayın.
Telefonunuzun dilini ingilizceye çevirmek için * # 0 0 0 0 # tuşlayın.
Batarya şarjı durumunuzu telefon kapalı iken öğrenmek için açma kapama düğmesi
olan NO tusuna kisa bir süre basip çekin
Here is how to activate the menu:
Lock to Network? if pressing yes you have 5 attempts to enter NCK.
Lock to Network subset? if pressing yes you have 5 attempts to enter NSCK. WARNING
Your phone can be locked to a service provider FOREVER by doing this!
If an invalid code is entered all five times, the menu will exit and be deactivated!
Any further attempt to activate the NCK/NSCK lock Menu will result in the
response "Not allowed"!
Tips & Tricks
Shortcut for Last Dialed call menu...
If you for some reason don't want to enter the 'Last Dialed calls menu' by
using the 'YES' key you can use the following key stroke instead:
First '0' then '#'.
Battery level indicator when turned OFF...
Press 'NO' key quickly once and then wait for about 2 sec for the battery level
to show up in the display at its normal position.
Full Network Name...
You can see the Full Network Name by doing the following:
Go to the network menu, when the phone displays the networks available
(in 'Select net' and 'Edit list' menu) you can press * and you will see the
full name.
Full Operator List...
You can view the full operator list by doing the following:
Go to the 'Edit list' menu under 'networks'. The phone say 'please wait'
(searching for other networks). When finished, Press the key once,
then YES twice. Now the phone displays the full list. Browse through
the list with the keys.
Call a phone number from SMS message...
You can call within a SMS message if the phone number is written in it.
Example of such a SMS message: Call me at 7654321. Just scroll through
the message until phone number appears on the display, then press 'YES' to call.
To view IMEI number enter * # 0 6 #
To fast dial press phone number pos nr and # (Example: 1 5 #)
To fast dial last number press 0 #
To reset main menu language to english enter * # 0 0 0 0 #
To see battery level while phone is turned off quickly press and release on/off(NO button)
To see Extended menus (on older versions) go to MISSED CALLS, empty directory, press and HOLD
right arrow button, choose menu type
To see Extended menus (on newer versions) go to READ, empty directory, press and HOLD
left arrow button, choose menu type
To edit phone book Turn on extended menus and choose "EditPh.Bk" How to use menu - Customize (from Extended menus).
Press Yes then you will be asked - EditMenus? - Press Yes
If the menu is Blinking it is disabled.
If it is not blinking it is enabled.
You can enable and desable by pressing "Yes"
When you enable a menu you can chose is position
When is asks for accept press "No" then if the arrow is it tells the position to the rigth
shift, you can turn it to left by pressinf "*", so like this you can tell the phone
the place of the menu by giving the number of the place of the menu like this: if your phone
shows "Store 2" the menu you are selecting stays on the 2nd shift to the rigth !
When everything is done press "No", and if you want to update press "Yes"
Command set
The following commands are recongnized by the phone.Use 9600 baud,1 stopbit,8 data bits,no parity.
ATA Pick up phone during ring
AT+GMI Manufacturer identification
AT+GMO Request model Identification
AT+GMR Request revision Identification
AT+GMM
ATDxxx; Dial number xxx
ATH Hangup phone
AT+CFUN=? Define levels of fuctionality in the order of power consumed
AT+CFUN=0 Switches off the phone
AT+CBC Query battery level
Each command has to be followed by a 0x0A, 0x0D sequence,that is carriage return-line feed.
These commands will be ackowledged with an 'OK' prompt.
An incoming call is signalled by the string 'RING' sent by the phone at 9600b in normal mode
Portable Handsfree Unit
1 Earphone: 16 Ohm
2 Microphone: - 2 kOhm
5 Connected to 04 (GND)
Pinouts
Left to right, keyboard up
1 Audio Out
2 Audio In
3 Accessory Sense. GND to enable External Mic and Speaker (Analog)
4 Audio Signal GND.
5 Portable handsfree In.
6 Music Mute Out, High when phone is used.
7 In Flash Memory Voltage and Service Voltage, In 0V=normal,+5V=test, +12V=test+flash
8 Logic Out, Status On. Sources over 100mA
9 Data Out from Mobile Station. Debug messages appear here at 112KBaud when in debug mode.
10 Digital Ground and DC return
11 Data in
12 DC in for battery charging, DC out for accessory power
ERİCSON 688
To view IMEI number *#06#
To view Software Version enter * * * CLR
To reset phone language to English *#0000#
*** 1-row text strings. If pressing YES you can check the phones 1-row text
programming in currently selected language.
*** n-row text strings. If pressing YES you can check the phones n-row
text programming in currently selected language.
Pinouts
1 = + external power supply. 7.2v @ 600mA.
2 = RS232 input (TTL)
3 = GND (digital)
4 = RS232 output (TTL)
5 = +5V output. Limited.
6 = Test. Switch phone off and provide +5V and switch back on. (set comms at 9600, n,8,1)
7 = Mute (0 - Normal, 1 - In Call)
8 = Internal/external (0 - External Mic/Speak, 1 - Internal Mic/Speak)
9 = GND (analog)
10 = Related to Mic/Speak
11 = BF in
12 = BF out
IMEI kodu * # 06 #
Yazilim ve üretim tarihi * * *
Ingilizceye Menü *#0000#
Batarya Telefon kapali iken batarya durumunu gödmek için NO tusuna basip 2 saniye bekleyin.
Servis Saglayicinin tam ismi Netvork menüsüne gidip
Servis saglayicilarin ismi ekrana geldiginde * tusuna basın
Baglanti Kablosu 1 = + external pover supply (7.2Volt - 600mA)
2 = RS232 input (TTL)
3 = GND (digital)
4 = RS232 output (TTL)
5 = +5V output
6 = Test (0=Normal - 1=test mode)
7 = Mute
8 = Internal/external mic and ear (0=External - open=Internal)
9 = GND (analogic)
10 = ?
11 = BF in
12 = BF out
ERİCSON 788
To view IMEI number *#06#
To view Software Version enter * * * *
Service Provider Lock is * * but it is now called the ME lock.
There are two options after selecting yes on another menu.
These are lock to Network or lock to NetSubet. Command set
The following commands are recongnized by the phone.
Use 9600 baud, 1 stopbit, 8 data bits, no parity.
ATA Pick up phone during ring
AT+GMI Manufacturer identification
AT+GMO Request model Identification
AT+GMR Request revision Identification
AT+GMM
ATDxxx; Dial number xxx
ATH Hangup phone
AT+CFUN=? Define levels of fuctionality in the order of power consumed
AT+CFUN=0 Switches off the phone
AT+CBC Query battery level
Each command has to be followed by a 0x0A, 0x0D sequence,that is carriage return-line feed.
These commands will be ackowledged with an 'OK' prompt.
An incoming call is signalled by the string 'RING' sent by the phone at 9600b in normal mode.
Portable Handsfree Unit
1 Earphone: 16 Ohm
2 Microphone: <- 2 kOhm
5 Connected to 04 (GND)
Pinouts
Left to right, keyboard up
1 Audio Out
2 Audio In
3 Accessory Sense. GND to enable External Mic and Speaker (Analog)
4 Audio Signal GND.
5 Portable handsfree In.
6 Music Mute Out, High when phone is used.
7 In Flash Memory Voltage and Service Voltage, In 0V=normal,+5V=test, +12V=test+flash
8 Logic Out, Status On. Sources over 100mA
9 Data Out from Mobile Station. Debug messages appear here at 112KBaud when in debug mode.
10 Digital Ground and DC return
11 Data in
12 DC in for battery charging, DC out for accessory power ERİCSON 888
To view IMEI number *#06#
To view Software Version enter * * * * Note: This code also shows version of Infrared driver software and text labels
Pinouts
1 = + external power supply. 7.2v @ 600mA.
2 = RS232 input (TTL)
3 = GND (digital)
4 = RS232 output (TTL)
5 = +5V output. Limited.
6 = Test. Switch phone off and provide +5V and switch back on. (set comms at 9600, n,8,1)
7 = Mute (0 - Normal, 1 - In Call)
8 = Internal/external (0 - External Mic/Speak, 1 - Internal Mic/Speak)
9 = GND (analog)
10 = Related to Mic/Speak
11 = BF in
12 = BF out
IMEI kodu * # 06 #
Yazilim ve üretim tarihi * * *
Ingilizceye Menü *#0000#
Batarya Telefon kapali iken batarya durumunu gödmek için NO tusuna basip 2 saniye bekleyin.
Servis Saglayicinin tam ismi Netvork menüsüne gidip
Servis saglayicilarin ismi ekrana geldiginde * tusuna basın
Baglanti Kablosu 1 = + external pover supply (7.2Volt - 600mA)
2 = RS232 input (TTL)
3 = GND (digital)
4 = RS232 output (TTL)
5 = +5V output
6 = Test (0=Normal - 1=test mode)
7 = Mute
8 = Internal/external mic and ear (0=External - open=Internal)
9 = GND (analogic)
10 = ?
11 = BF in
12 = BF out
